Saturday, April 28, 2012

Armored Cars Save Lives and Dead Clients Don't Pay





DEAD CLIENTS DON’T PAY

DEAD CLIENTS DON’T PAY

When Barack Obama was elected president, America got more than just a new leader. It also got a new car.
When Barack Obama was elected president, America got more than just a new leader. It also got a new car. A foot taller than all the other Secret Service cars and loaded with the newest advances in probably unnecessary technology, it caused a media stir on Inauguration Day. In a recent article in the Los Angeles Times, automobile reporter Dan Neil wrote, “Barack Obama’s new limo — code-named Stagecoach — is a massive, mobile redoubt, a cross between a Cadillac and a hardened missile silo.”
Neil speculates that America’s new 15,000-pound First Car has several inches of outer armor, an undercoating of Kevlar and other materials to prevent damage from grenades and bombs beneath it, thick bullet-resistant glass in all windows and an interior air system made to prevent the entrance of poisonous gases. Combine those measures with “run-flat” tires that will drive safely even when shot out, and you’ve got something quite effective against everything from a mob of people carrying pitchforks to commandos with high-powered weapons.
But if you want your own version of a Stagecoach, don’t call its maker, General Motors Corp. Even though GM could use the business, it’s not going to sell you one. In fact, you can’t even buy a used version because they’re destroyed and replaced every four years. Instead, you’ll need a company like the International Armoring Corp., with plants around the world that equip cars with armor. In its 16-year history, IAC has sold 5,500 armored vehicles in 58 countries.
Armament options are similar to Stagecoach, but not as intensive. All armor is hidden: The entire passenger compartment, including pillar posts and floorboards, is sheathed from inside with ordnance- and shrapnel-stopping material. There is a balancing act here: Retrofitting is done to existing cars that were never meant to carry that much weight. That can make for sluggish handling, even though to survive an attack a car must be nimble enough to get away.
“The most critical area to armor is your glass,” says IAC chief executive Mark Burton. “Ninety percent of the rounds are aimed at your glass, but because they’re bad shots we armor the rest of the vehicle as well.”
There are several international standards for protection — all based around what kind of firepower you think you might encounter. IAC uses the European “B” system, and its two most popular ratings are B4 and B6. A B4 will stop a .44 Magnum. If you worry less about Dirty Harry and more about the Taliban, a B6 rating will defend against an AK-47, an M-16 or a high-powered rifle such as a .308 Winchester. To stop armor-piercing rounds, you’ll need a B7, usually requested for heads of state. A B4 and above will thwart explosive devices from underneath the car, protect the fuel tank and provide run-flat tires. Extras such as a bullet-proof battery, dual-ram bumpers and an internal oxygen system are available. It’s all a matter of cost and weight.
IAC can armor almost any newer model of automobile, from Porsches to Suburbans. If you bring your own car, IAC will fit it to a B4 level for about $48,500, and a B6 level will set you back around $65,000.

Friday, April 27, 2012

Ballistic Protection for Armored Cars


International Armoring Corporation (IAC) uses the most technologically advanced material for their armored cars.  IAC armored passenger vehicles are able to withstand a wide variety of attacks.  To learn more about our differing protection levels, please review our ballistic page.  On this page you will find just some of the cutting edge technology that goes into an IAC vehicle.
BMW-Armored-Car Charcoal Gray Armored Truck Armored-Toyota-SUV Armored-Cadillac-Escalade

ARMORMAX®:

Armormax® is the ultimate in light weight ballistic armoring material.  It was developed and owned by International Armoring Corporation.  Armormax® is the lightest opaque armor in the industry; it reduces the added weight on a vehicle by up to 60% (over traditional steel armoring material), making it the lightest weight armoring system in the world.  Armormax® is composed of a combination of synthetic fibers.  The Armomax® composite technology is ten times stronger than ballistic steel – pound for pound!

WELD FREE™:

The Weld Free™ method is the most recently developed advancement from International Armoring Corporation.  Weld Free™ is an independently certified* method used to place ballistic steel into vehicles without changing the ballistic properties of the steel armor.  Standard welding methods cause heat effected zones, eliminating the ballistic integrity of the armored steel.
Ask Yourself:  Is my armored vehicle certified to fail?
*Certified by H.P. White Laboratories

Transparent Armor (GLASS):

Referred to as Lightweight Transparent Armor or LTA®, LTA® is the material used by International Armoring Corporation for armoring the glass in all its vehicles.  LTA® glass provides a superior level of protection against the toughest security concerns, from random acts of street violence to Head of State protection.  LTA® is International Armoring Corporation’s ballistic glass of choice. The LTA® Glass is composites of glass and polycarbonate substrates laminated with inter layers.  This is done to absorb the energy and penetration from various ballistic threats through a process known as “controlled de-lamination.”  The inner layer of polycarbonate is used to prevent spalling (fragment release – bullet, jacket or glass) upon ballistic impact.  To learn more about the protection capabilities of the LTA® glass please refer to the Protection Levels page for clarification.LTA® Glass is:
  • Distortion Free
  • Looks identical to original vehicles glass – maintains original appearance
  • Lighter and thinner than all-glass laminates or air-gap designs
  • Unaffected by temperature fluctuations
  • Offers dependable protection against a variety of lethal weapons

Run flat tires:

IAC can modify all existing tires in an armored vehicle with Run Flat tire inserts.  The Run Flat Tire inserts allows the vehicle to travel up to 60 miles at 60 mph (depending on road conditions) on deflated tires.  This insert is composed of a ballistic rubberized plastic “roller” ring that is designed, molded and installed inside each tire around the rim. Once the tires are deflated, the solid rubber ring acts as a backup tire, becoming an airless spare within the tire.

Elitus®

International Armoring Corporation’s commitment to continuous research and development assures clients the most technologically advanced armored passenger vehicles available. One example of such is International Armoring Corporation’s Elitus® Overlap System. This concealed molded armoring process (called Elitus®) assures an added level ballistic protection in all vulnerable (“weak”) areas in the passenger compartment – especially door openings and around windows.

Suspension:

The suspension of the vehicle (including shocks, springs and/or sway bars), along with the brakes should be modified when a vehicle is armored.  International Armoring Corporation recommends its clients begin the armoring process with a heavier duty vehicle.  This will help with the modification process of upgrading the suspension, shocks and brakes later on.  The modification is done with a standard package that may vary depending on the needs of the client.

Bumpers:

Dual Ram Bumpers can be added to a client’s armored vehicle.  They are concealed behind both the front and the rear bumpers.  This option allows each vehicle to ram its way out of a dangerous situation without causing inoperable damage to the armored vehicle.  In addition, this modification prohibits corners of the vehicle from being rammed into the tires, thus making the armored vehicle inoperable.

FUEL TANK AND FLOOR PROTECTION:

International Armoring Corporation’s dedication to bring tomorrow’s technology to today’s vehicles is evident in the armoring process.  An example of such is the attention to detail.  To ensure the safest vehicles, IAC protects the floor of the vehicle with a multi-layered ballistic nylon armor that is used to seal the entire floor of the vehicle.  The floor armor is designed to absorb bomb fragmentation.  The armor is concealed under the carpet and seats of the vehicle, maintaining the original appearance of the vehicle.  Armor is also placed surrounding the fuel tank of each vehicle to create an anti-explosive fuel tank.

3RD HINGE DOOR SUPPORT:

3rd Hinge Door support is added to level B7 armored vehicles and whenever possible.   A complete door structure modification is done to support any weight added by the armor material.  This includes reinforcement of pillar posts and hinges.  All modification in the door is done to help the armored door maintain its original functionality.
Custom-Armored-Coach-Bus

International Armored Cars


International Armoring Corporation (IAC) is a premier vehicle armoring company that secures all makes and models of cars and trucks while maintaining the vehicle’s original appearance and performance. Since beginning operations over 15 years ago, IAC has produced in excess of 7,000 armored cars.  By using proprietary armoring designs and installation techniques as well as the latest lightweight armoring materials, IAC provides the most technologically advanced protected vehicles available.  These vehicles have been delivered to heads of state, corporate executives, celebrities, religious leaders, and civilian contractors all over the world.
Please call: (888) 372-2214
With manufacturing and service facilities worldwide, IAC is able to provide superior after the sale service. This unbeatable service after the sale, as well as the use of advanced design, materials and installation techniques, makes International Armoring Corporation the world’s leading vehicle armoring company.
Contact our sales representative to learn more about our armored vehicle and how we can help protect you!
SALES REPRESENTATIVE
Armored-Cars-International-Sales
Armoring facility       Armoring Facility Brazil      Armoring-Facility-Utah